Specification: 
Emitter |
Four LEDs on a copper DTP MCPCB e.g. |
Optic |
Standard TIR optics |
Lens |
Glass with anti-reflective coating |
Flux |
~3600 lm (XP-L Hi), ~2100 lm (Nichia,SST20 4000K) |
Intensity |
~10, 180 cd ANSI throw ~208 m (XP-L Hi) |
Battery |
One flat-top or button-top 18650 cell. An unprotected cell is recommended (not included) |
Driver |
FET+7+1 driver. Low parasitic drain while OFF |
Switch | Electronic tail switch |
Ingress rating | Equivalent to IPX7 |
Weight | Approximately 63 g without cells |
Body |
Aluminum with hard-coat anodizing |
 
Firmware: The FW4A uses free software called Andúril, distributed under the terms of the GPL v3. Code is available from tiny.cc
 User interfaces: [1] By default the FW3A is set to use SMOOTH RAMPING. Access to TURBO mode is also provided.
 [2] A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.
 [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power
 [4] MUGGLE mode uses a reduced output.
 [5] It has an electronic LOCKOUT for safety, but acts also as momentary low light.Other functions: Battery check, sunset, beacon, tactical flashing, party flashing, bike flasher, candleligh.
 
  Package included:
 1 x Lumintop BLF FW4A Flashlight
(Not includes battery and charger)
Reviews
There are no reviews yet.